Shop

  • 0 out of 5

    Water Test Aviation

    Water Test Aviation

    Measurement of the water content of aeronautical fluids

    The GESERCO Water Test Aviation Water Test Aviation WTGC-96-10000 has been developed in collaboration with AIRBUS INDUSTRIE for thesimple and fast control of the presence of water in the hydraulic control fluids of aircraft.

    The WTGC-96-10000 contains all the accessories and equipment necessary for taking samples of the oil to be tested and measuring the moisture content on the aircraft.

    • Measuring range: 0 to 10% H2O
    • Accuracy: ± 100 PPM
    • Implementation: 5 minutes
    • Measuring principle: Reactive method
  • 0 out of 5

    WaterTest Briefcase

    WaterTest ™ Briefcase

    Analysis of the Water Content of Oils, Fuels and Solvents

    Method derived from ISO9114: 1997.

    The GESERCO WaterTest ™ allows simple, fast, accurate and inexpensive determination of water content in:

    • Mineral oils and petroleum products (motor oils, fuels, brake fluids, gearbox oils …)
    • Synthetic oils and lubricants
    • Fuel bios and bios lubricants
    • Vegetable oils
    • Aromatic liquids
    • Alcohols
    • Soluble products (greases …)

    Lightweight and robust , the GESERCO WaterTest ™ briefcase can be used in the field by any non-specialist staff. The WaterTest ™ Briefcasecontains no hazardous chemical reagents for transport .

     

  • 0 out of 5

    WT reagent

    WT reagent

    Reagent for water content

    Reference: WT9200

    Bottle of 50 WT reagent capsules for measuring the water content.

    This reagent can be used with the following instruments:

    • Aquatest
    • PreciWaterTest
    • UltraPreciWaterTest
    • WTGC
    • WaterTest
    • Rapid Digital Lubricant Tester
  • 0 out of 5

    WT2 solution

    WT2 solution

    Solvent for water content test

    Reference: WT9201

    500 ml bottle of WT2 solution for measuring the water content.

    WT2 is an anhydrous solvent for diluting fluid samples to measure their water content. The WT2 solution is particularly suitable for testing polluted or viscous fluids (black oils, heavy fuels, fuel oil, greases, etc.).

    The WT2 solution is compatible with the following GESERCO reagents:

    • Reactive WT ref WT9200
    • Reactive WT / NH ref WT9207

    The WT2 solution can be used with the following GESERCO instruments:

    • Aquatest
    • PreciWaterTest
    • UltraPreciWaterTest
    • WTGC
    • WaterTest
    • Rapid Digital Lubricant Tester