HRC Coupling

hrc

HRC Coupling

0 out of 5
( There are no reviews yet. )

Specifications

We are Prominent Manufacturer and Exporter of HRC Coupling From India. We Export HRC Coupling All across in Usa, Germany, UK, Malaysia, Singapore, Russia, Oman, UAE. these HRC Coupling Manufactured With High Quality Material. We Export HRC Couplings All across Globally. HRC couplings consist of 2 cast-iron halves attached to shafts by means of either hub mount (H Flange) or face mount (F Flange) taper bushes. Between these two halves is a rubber “spider” that serves as a shock absorber HRC Couplings allow for a limited parallel misalignment (0.5mm) and axial misalignment (1.5mm). Can be used on shafts with taper bushes to 90mm bore or shafts up to 130mm if bored through with keyway.

Category:
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “HRC Coupling”

Related Products

  •
    Read more
    0 out of 5

    Gear Coupling

    Specifications

    We are Prominent Manufacturer and Exporter of Gear Coupling From India. We Export Gear Coupling All across in Usa, Germany, UK, Malaysia, Singapore, Russia, Oman, UAE. these Gear Coupling Manufactured With High Quality Material. We Export Gear Coupling All across Globally. A gear coupling is a mechanical device designed to transmit torque between two shafts that are not collinear. The coupling typically consists of two flexible joints, one fixed to each shaft. These joints are often connected by a third shaft called the spindle.

    Read more
  • Read more
    0 out of 5

    Nylon Gear Coupling

    Specifications

    We are Prominent Manufacturer and Exporter of Nylon Gear Coupling From India. We Export Nylon Gear Coupling All across in Usa, Germany, UK, Malaysia, Singapore, Russia, Oman, UAE. these Nylon Gear Coupling Manufactured With High Quality Material. We Export Nylon Gear Coupling All across Globally. A gear coupling is a mechanical device designed to transmit torque between two shafts that are not collinear. The coupling typically consists of two flexible joints, one fixed to each shaft. These joints are often connected by a third shaft called the spindle. Compogear is a range of couplings made of two steel, crowned teeth hubs, which are connected with a polyamide internally toothed sleeve. The special new design of the crowned teeth hubs and the lubrication free combination of steel with polyamide ensure good sliding properties and leads to low maintenance and low wear operation, also with important axial, angular and radial misalignment of the shafts. Compogear is resistant to all types of lubricants and hydraulic fluids and can be used at a temperature range of -25°C +80°C.

    Read more
  • Read more
    0 out of 5

    MT Coupling

    Specifications

    We are Prominent Manufacturer and Exporter of Mt Coupling From India. We Export Mt Coupling All across in Usa, Germany, UK, Malaysia, Singapore, Russia, Oman, UAE. these Mt Coupling Manufactured With High Quality Material. We Export Mt Coupling All across Globally. The MT gear coupling is a steel double-joint coupling. Main function is to transmit torque and at the same time accommodate the misalignment between two shafts.

    Read more
  • Read more
    0 out of 5

    Grid Coupling

    Specifications

    We are Prominent Manufacturer and Exporter of Grid Coupling From India. We Export Grid Coupling All across in Usa, Germany, UK, Malaysia, Singapore, Russia, Oman, UAE. these Grid Coupling Manufactured With High Quality Material. We Export Grid Coupling All across Globally. A grid coupling is composed of two shaft hubs, a metallic grid spring, and a split cover kit. Torque is transmitted between the two coupling shaft hubs through the metallic grid spring element. … A negative of the grid coupling design is that it generally is very limited in its ability to accommodate the misalignment.

    Read more
  • Read more
    0 out of 5

    Brake Drum Coupling

    Specifications

    We are Prominent Manufacturer and Exporter of Brake Drum Coupling From India. We Export Brake Drum Coupling All across in Usa, Germany, UK, Malaysia, Singapore, Russia, Oman, UAE. these Brake Drum Coupling Manufactured With High Quality Material. We Export Brake Drum Coupling All across Globally. The brake drum coupling is used to connect the motor and gearbox shaft or gearbox and machine shaft. The brake is fitted on the brake drum. Thus it serves dual purpose of being a coupling and brake drum. It is Pin-bush type and has two parts : the brake drum and flange.

    Read more